Specifications
2 years supplier warranty
Testing certification: ECE R129/O3, with i-Size certification
Product usage:
- rearfacing with 5-point harness: 40-105 cm, birth to approx. 4 years
- forward facing with 5-point harness: 76-105 cm, 15 months to approx. 4 years
- forward facing with 3-point vehicle seat belt: 100-150 cm, 3.5 years to approx. 12 years
- 360° spinning feature: birth to 150 cm, approx. 12 years
Product dimensions:
- rearfacing: l 69.5 x w 52.5 x h 71.5 cm
- forward facing: l 54.5 x w 52.5 x h 85 cm
Product weight: 14.5 kg
FAQs
What EU safety standards does this car seat meet?
Our i-Spin XL 360° spinning multi-age car seat meets the highest ECE R129safety standards, including rigorous side impact testing, with i-Size certification for a guaranteed good fit in i-Size vehicles and reduced risk of installation errors.
Has this seat been ADAC tested?
Yes! i-Spin XL has been tested by the independent German safety testing organization ADAC, known for their rigorous crash testing that goes above & beyond even the highest EU legislation crash testing requirements. i-Spin XL scored an impressive 2.4 in crash tests with remarks for very low risk of injury in a side impact collision.
Does this car seat require a base for installation?
No. i-Spin XL has an integrated base and requires no additional base purchases for installation.
What is the maximum height and weight usage for this car seat?
The maximum height and weight for use in rear-facing mode is 105 cm and 18 kg, or approx. 4 years. i-Spin XL can be used in forward facing mode with the 5-point harness from 76 cm to 105 cm and 18 kg, or 15 months to approx. 4 years. As a belted booster, i-Spin XL can be used from 100 cm to 150 cm and 36 kg, or approx. 3.5 to 12 years.
How do you install this car seat?
ISOFIX and load leg are used to install i-Spin XL while rear-facing and forward facing when using the harness. ISOFIX only is used to install i-Spin XL while using in belted booster mode. Please see our instructional video that demonstrates how to install the i-Spin XL car seat.
Which pushchairs is i-Spin XL compatible with?
Due to the integrated base, i-Spin XL is not compatible with pushchairs and cannot be used as a travel system.
How do I clean this seat's covers when they are dirty?
You can spot clean light marks with gentle cleaners. For heavier dirt, covers are removable and machine washable in cold water on the delicate cycle with a gentle detergent. Do not bleach, dry clean, or iron them.
When do I remove the infant insert from this seat?
The infant insert adds side protection for your baby and we recommend using the infant insert while your littlie is under 60 cm or until they outgrow the insert. You can remove the infant insert when your child's shoulders no longer fit comfortably and they are starting to look cramped or restricted.
Can this car seat be used on a flight?
i-Spin XL is not airline approved for use in-flight.
Product Description
Meet i-Spin™ XL Signature
• Meet the one-seat wonder that grows along with your child all the way from birth to 12 years old, fitting both babies and big kids comfortably and simplifying each car ride from the newborn days almost up until the teen years!
• A 360° spin makes it easy to buckle your child in, whether you have a fragile infant or a wiggly toddler.
Product Features:
• Meets the new i-Size ECE R129/03 standard
• Suitable rearward facing from birth to 105 cm
• 5-position recline is usable on-the-go both rearward and forward facing
• 360º seat rotation makes for easy buckling in and out of the vehicle
• Exclusive Tri-Protect™ headrest offers security with three layers of protection inside the wings, including patented Intelli-Fit™ memory foam.
• GrowTogether™ headrest and harness system adjust simultaneously and requires no re-threading of harness
• Grow-with-me infant insert has 3 individual pieces for a custom fit at any stage\n
• Guard Surround Safety™ pod for optimal side impact protection
• Steel reinforced ISOFIX connectors attach firmly to vehicle anchor points
• Swivel lock off on either side of the base prevents you from turning the car seat forward facing. Rear-facing is required until at least 15 months.
• Reinforced steel shell for structural integrity in a crash
• AutoAdjust™ side wings expand as the headrest is raised for more room in neck and shoulders
• Low rebound bar creates ample space for growing legs.
Installation Method:
• ISOFIX and load leg are used in harness mode while rear facing and forward facing.
• ISOFIX is used for booster mode - harness and load leg are stored away within the seat
• 21 position load leg ensures the car seat is stabilized in various vehicle makes and models.
Product Specifications:
Model: C2205
Weight: 14.5 kg
Usage:
• Rear facing with 5-point harness: 40-105cm
• Forward facing with 5-point harness: 76-105cm, minimum of 15 months
• Forward facing with 3-point vehicle seat belt: 100-150cm
• 360º spinning feature: birth to 105cm/approx. 4 years old
Forward facing: L 54.5cm | W 52.5cm | H 85cm
Rear facing: L 69.5cm | W 52.5cm | H 71.5cm
Testing certification: ECE R129/03"}]}